Topic: I can't get the brakes to bleed. (Read 5356 times)

GermanStar · « **Reply #20 on:** May 29, 2009, 07:47:41 AM »

Oh sure, just go ahead and pick on the kid with no LASIK....

Digmenow · « **Reply #21 on:** May 30, 2009, 05:26:59 PM »

I did not get the chance to sample the food or service here.

Can we get back on topic about bleedin' brakes?

shelley aries · « **Reply #22 on:** June 05, 2009, 04:23:51 PM »

i would recomend take your time and do a gravity bleed its very simple loosen the bleed valve one the calipur starting first with the back pasanger side first just loosen it up also take the fill cap off of the master cylinder are it will not work and make shure you keep filing it back up you can do all four wheels at one time but make dhure you pay attention it just bleed mine out and changed the brake pads and the old brake fluid was green

drewprof · « **Reply #23 on:** June 06, 2009, 06:51:29 PM »

I got it fixed! I did just that, bled the system by simply filling the reservoir and pumping by foot. I will put my power bleeder to pasture now.

jamo37 · « **Reply #24 on:** June 11, 2009, 12:53:51 PM »

Bleed from the top coming down. master ,abs pump, wheel cylinder ,remove the bleeder nipple use your finger to block the whole have the brake depress using your finger to bleed replace nipple and bleed till fluid contain no air.

News:

Author Topic: I can't get the brakes to bleed. (Read 5356 times)

GermanStar

Re: I can't get the brakes to bleed.

Digmenow

Re: I can't get the brakes to bleed.

shelley aries

Re: I can't get the brakes to bleed.

drewprof

Re: I can't get the brakes to bleed.

jamo37

Re: I can't get the brakes to bleed.