German Star Discussion Forum
Please login or register.

Login with username, password and session length
Advanced search  

News:

We pay cash for the following cores: Fuel Distributors, Warm-Up Regulators, Convertible Top Hydraulic Cylinders!

German Star
Pages: [1]   Go Down

Author Topic: 190E Fuel pump relay  (Read 1144 times)

0 Members and 1 Guest are viewing this topic.

yanceycat

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • Vehicle: 89 Mercedes 190E
  • Location: St Marys,Ga
  • Member
190E Fuel pump relay
« on: January 01, 2010, 06:14:26 PM »
I looking for info to test a fuel pump relay 89, 190E 2.6 (103 141) The # on the relay is 002 545 92 05 I'm a DIY there no way I can have shop test it.
The car start good cold but it seem to be getting to much gas it will die when it warm up and not start again till the next day
There good spark I clean all the plugs but I get a dry black stoot on them after running for 15 min The car used no oil so it not oil
I just had to replace the OVP and a wire from the Ign sw to the OVP
The fuel filter was replace this summer and you can hear the pump working:confused:
Logged

CIS Flow Tech

  • CIS Guru
  • Global Moderator
  • Jr. Member
  • *****
  • Offline Offline
  • Posts: 39
Re: 190E Fuel pump relay
« Reply #1 on: January 02, 2010, 09:41:37 AM »
It sounds like a differential pressure problem. It probably is running lean and has incomplete combustion, this will cause sooty plugs. You need to put a pressure gauge on it and see what the differential pressures are.
 
Larry
Logged
Pages: [1]   Go Up
 

Copyright ©2011 German Star Mercedes Parts

Powered by EzPortal
Theme "SageGreyIs" design by Imô¿ôu2 © 2008